Operation
Transmitter Front and Rear Panels
Controls and
Functions
1.
IR1 OUT/Blaster
Connect to the supplied IR Blaster for IR signal transmission to the source equipment
from IR1 IN's IR signal. Place the IR Blaster in direct line-of-sight of the equipment to
be controlled.
2.
HDMI IN
Connect to the HDMI input source devices such as a DVD player or a Set-top Box
with HDMI cable or DVI to HDMI cable.
3
IR2 IN/Extender
Connect to the supplied IR Extender cable for IR signal reception and transmission to
IR2 OUT. Ensure that remote being used is within the direct line-of-sight of the IR
Extender.
4
DC 5V
Plug the 5V DC power supply into the unit and connect the adaptor to an AC
outlet.
5
CAT5e/6 OUT
Connect to the Receiver unit with a single CAT5e/6 cable for transmission of all data
signals. The yellow LED will illuminate when both Transmitter and Receiver are
connected together with power supply. The green LED will illuminate when the
power supply is connected to the device.
Содержание 15353
Страница 6: ...Connections ...
