Converters.TV 15204, Руководство по эксплуатации

Страница: 6 / 11

RS-232 Protocols
# ID 15204 Remote Control Console
PIN Assignment PIN Assignment
1 NC 1 NC
2 Tx 2 Rx
3 Rx 3 Tx
4 NC ► 4 NC
5 GND ◄ 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
Baud Rate: 19200bps Parity: None Stop Bit: 1
Data bit: 8 bits Flow Control: None
RS-232 & Telnet
Commands
Command Description
A1~A8 Switch Output A to 1~8
B1~B8 Switch Output B to 1~8
C1~C8 Switch Output C to 1~8
D1~D8 Switch Output D to 1~8
E1~E8 Switch Output E to 1~8
F1~F8 Switch Output F to 1~8
G1~G8 Switch Output G to 1~8
H1~H8 Switch Output H to 1~8
ABCE...1~ABCD...8 Switch Output ABCD... to 1~8 at the
same time
SETIP <IP><SubNet><GW> Setting IP. SubNet.GateWay<Static IP>
RSTIP IP configuration was reset to factory
defaults<DHCP>
IPCONFIG
Display the current IP config
P0 POWER OFF
P1 POWER ON
I1~I8 switch all the output to 1~8
ST Display the current matrix status and F/W