8
7. Setting up the Receiver
The best setting for text recovery is 50% or more.
Press and hold the + button for a while to get
up to 100% then press the – button 2 or 3 times
for an ideal setting. Most settings will give
optimum results.
Check that the light is GREEN, indicating that the
Conversor is working properly and receiving its
microphone’s signal.
8. Connecting a Director HD microphone
Simply plug the Director HD microphone into the
SCRIPT headset socket. Turn SCRIPT OFF and ON
again, to make it recognize the connection.
A ‘beep’ tone can be heard.
9. Listening as well as TEXT
When you plug in the SCRIPT, the neck loop is
disconnected, so you will need a second Receiver
if you want to listen to the same HD Microphone
sound as the text displays.
A second microphone can be purchased from
https://www.conversorproducts.com/shop/
conversor-pro-receiver/
1. To increase the volume
select this button. An
audible sound is heard
each time the volume
buttons are pressed.
2. To decrease the volume
select this button.
3. Switch the Receiver
ON/OFF by pressing the
bottom button for 2 – 3
seconds
4. Microphone
> Setting up SCRIPT for the
first fime
