HARDWARE
E x 8
NEEDED
G x 2
H x 2
1.) Attach Doors ( 7 ) to unit using
Medium Screws ( E ).
2.) Attach Knobs ( G ) to Doors
using Knob Screws ( H ).
**After Final Assembly, Adjust Hinge Screws
for Better Alignment **
HARDWARE
J x 1
NEEDED
1.) Carefully pull apart Wire Cap ( J ) into Two pieces if needed.
2.) Align each half of the Wire Cap with pre-cut openings in both sides of
Back Panel ( 9 ). Firmly push together until snapped into place.
HARDWARE
D x 24
NEEDED
1.) Attach Back Panel ( 9 ) to unit by
using Small Screws ( D ).
J
STEP 6
STEP 7
STEP 5
J
D
E
E
E
H
G
E
9