CONVECTAIR CALYPSO 7825, Инструкция по установке и эксплуатации

Страница: 18 / 26

5.
Model
Total
Power
Regulated
power
Forced
power
Width
(inch)
Height
(inch)
Depth
(inch)
Weight
(lb)
7825-C20 2000 W 1000 W 2000 W
12
1/4
’’
(310 mm)
16
1/8
’’
(410 mm)
6’’
(150 mm)
11,9
(5,4 kg)
1 SPECIFICATIONS
- Your new CALYPSO is a fan-forced heater.
- This heater is equipped with 2 heat levels : 1000 W regulated with the electronic
thermostat and 2000 W fast heat on demand.
- Minimum obstruction and designed to heat your room quietly, consistant heat, it is a
perfect heater for your bathroom or other intermittently-used rooms.
- Your CALYPSO can be used with the optional CONVECTAIR Programmer Module
(pilot wire) allowing scheduled temperature set-backs in periods of prolonged absence
providing the same comfort and more savings.
READ CAREFULLY :
These instructions are essential to install and use your new
CALYPSO safely.
2 RECOMMENDED SETUP
- Your heater must be installed in accordance with national and local codes and
CONVECTAIR recommends an installation by a quali
¿
ed electrician.
- Your heater must be installed so that the control panel is out of reach from anyone in the
bath-tub or in the shower. Do not install over a bath-tub or spa.
- Do not install the heater behind a door, furniture or others obstacles, or in front of an
air exhaust vent. Keep combustible materials such as curtains, away from the heater.
- Your heater is equipped with a heating element that may reach high temperatures. Do
not install or operate in the presence of gasoline, paint solvents or other
À
ammable
products.
- Maintain the minimum required clearances (height from
À
oor, distances from side walls
or furniture, drapes, etc...)(Fig. 3).