6.
Locking the setting dial :
First, detach the unit from the wall
brackets. Behind the setting dial, two
pins are provided. Remove the pins
with pliers by rotating gently. To lock the
setting dial, insert a pin in front of the
"F" mark. To block the setting between
the minimum and a desired maximum
setting, insert a pin in front of the "M"
mark (Figure 5).
Temperature limiting control :
This heater is equipped with a manual reset control. In case of a malfunction of
the unit (blocked air output or intake, for example) the heater will stop heating
automatically. After correcting the malfunction the heater can be reset. To restart
the heater, push the button on the upper back panel of the heater.
Maintenance
6
To keep your CONVECTAIR unit clean,
regular maintenance is suggested. To remove
dust, use a soft cloth. To remove a stain, use
a damp cloth. For a better performance and
a maximum efficiency, it is suggested that
dust and lint be regularly removed from the
protective grille situated at the base of your
Convectair (Figure 6).
SETTING
DIAL
LOCKING
PINS
Figure 5
Figure 6
never use abrasive or aceTone-based producTs To clean
The heaTer as This may cause deTerioraTion of The epoxy
finish.
any repair on your convecTair heaTer should only be done
by a qualified Technician afTer disconnecTing The heaTer.
