WARNING!
•
ConvaQuip recommends that users not be transported in vehicles while seated in the chair. We
do not approve of any tie-down system for transportation of users in any moving vehicle while
seated in the chair.
•
Do not tilt the chair back when occupied. This may cause serious injury to chair user or
assistant.
•
Do not attempt to go up or down steps.
•
Do not ride over curbs or obstacles. This may cause the chair to become unstable and cause
bodily harm to you or damage the chair.
•
Do not use this chair outdoors.
•
Do not use your chair on a slope grade steeper than 10%. (A 10% slope grade means one foot
in elevation for every ten feet of slope length.)
•
Do not park the chair on an incline.
•
Do not lift the chair by any removable parts including armrests and footrests. Lifting the chair by
these parts, occupied or not, may damage the chair.
•
Do not stand on footrests. When entering and exiting chair always fold up footrests.
•
Do not move forward in seat to reach for objects. Do not pick objects up from the floor by
reaching down between your knees.
•
Do not lean over the top of the chair back.
•
Do not change the caster wheel position.
•
Wipe the shower chair dry immediately after use.
Footrests-
Footrests are length adjustable. A simple through
bolt provides quick and easy adjustments. To remove
footrests rotate lock levers up and lift footrest assembly off.
Lock Lever
Wheel Locks-
As tires wear,
adjust locks to prevent 24”
wheels from turning when
locks are engaged. To
adjust, loosen the locknut
located on the clamp bracket.
Slide the wheel lock on rail to
proper position. Retighten
the locknut. If wheel locks
become worn replace
immediately.
Locked
Unlocked
Caution!
ALWAYS ENGAGE WHEEL LOCKS WHEN ENTERING OR EXITING CHAIR.
