Convair CTH01, Инструкция пользователя

Страница: 4 / 8

2
OPERATION
COMPONENT LIST
A
B
C
POWER
D
E
AIR OUTLET
F
POWER BUTTON
CONTROL PANEL
INDICATOR
AIR INLET (REAR)
BASE
A
B
C
F
E
D
OPERATION
OSCILLATION FUNCTION
The Convair fan heater is excellent in
providing spot heating throughout your
home.
It should not be considered as a
centralized heating unit for your whole
house.
• Insert the plug into the power outlet.
• Turn the heater ON by pushing the
“ON/OFF” button on the unit (see Fig 1). The
button will be lower when depressed and the
FAN will start operating.
• Press one of the “1000W” heater buttons.
The heater will operate on LOW HEAT
setting.
• Press the second “1000W” heater button.
The heater will operate on HIGH HEAT
setting. Press one or both of the “1000W”
buttons again to revert back to LOW HEAT or
FAN modes.
• Press the “ON/OFF” button to turn the
heater off. This can be done on any setting
and will return to these settings when
switched back on.
Press the “ TURN ” button on the control
panel to turn oscillation on. The heater will
swing from side to side in a 90° arc. Press
again to stop oscillating.
TURNING THE POWER ON
ß à
ON/OFF
1
0
0
0
W
ß
TURN
à
1
0
0
0
W
1
POWER BUTTON
OSCILLATE CONTROL
HEAT LEVEL SELECT
LOW = 1 X “1000W”
HIGH = 2 X “1000W”
•
•