Convair CoolTowerCTF07, Руководство пользователя

Страница: 5 / 8

Component List
Assembly
1 Remote Control
2 Main Body
3 Stand
4 Base Screws x3
5 Locking nut
Unpack the fan and check that you have
all of the components.
Locate the plastic locking nut and turn
the fan upside down. Assemble the
base onto the stand and lock into
position with the nut.
Note: Ensure the nut is tight to avoid
shaking of the fan.
2 CTF07
ASSEMBLY
Remote Control Storage
Replacing the battery
The remote control is stored in the
remote control holder located at the top
of the rear enclosure as shown in Fig 2.
Your remote control is supplied with a
battery. To begin use, open the battery
cover and insert the battery supplied
(Fig 3). Check the polarity is correct
and replace the back cover.
When the fan’s power is on, the remote
control can be used to operate the fan
from up to 6m away. Note: if there are
two or more fans within this distance,
both will be operated by the same
remote control.
6
3
2
1
4
5
Operation
Modes
Insert the plug into the power outlet.
The fan is operated by a ‘touch’ screen
control panel (refer Fig. 4)
Touch the button to turn the fan
on. Select the desired fan speed (low-
med-high) by touching this button. Each
touch will cycle between the speeds.
Turn the fan OFF by touching the
button at any time.
The fan has 3 modes of operation:
Normal, Nature and Sleep. Touch the
button to cycle between these
modes.
Normal mode: The fan will work
continuously at the selected speed
setting.
Nature mode: is shown and
if set at high speed, the fan will cycle
between high, medium and low
speeds for 5 seconds each. If the
fan speed is set to medium, the fan
Ÿ
Ÿ
OPERATION
will cycle between medium and low.
If set to low, the fan will cycle
between low and off.
Sleep mode: is shown and if
set at high speed the fan will first
work at high speed nature mode for
30 min, then at medium speed
nature mode for 30 min, then
continue working at low speed
nature mode.
Touch the button on the control
panel to enable the swing function. The
control panel will display the
symbol and the fan will swing from side
to side in a 90° arc. Touch again to stop
oscillation.
Note: Do not force or hinder the
oscillation movement !
Ÿ
Swing Function
®
SEELEY INTERNATIONAL – OWNER’S MANUAL 3
1
2
3 4
MODE
OFF
SWING
ON/SPEED
Z
Z
OFF ON/SPEED MODE SWING TIMER SHIFT
FAN1 FAN2 FAN3
1 2 3
Z
Z