3
CTF07
Operation
Modes
Insert the plug into the power outlet.
The fan is operated by a ‘touch’ screen
control panel (refer Fig. 4)
Touch the
button to turn the fan
on. Select the desired fan speed (low-
med-high) by touching this button. Each
touch will cycle between the speeds.
Turn the fan OFF by touching the
button at any time.
The fan has 3 modes of operation:
Normal, Nature and Sleep. Touch the
button to cycle between these
modes.
Normal mode: The fan will work
continuously at the selected speed
setting.
Nature mode:
is shown and
if set at high speed, the fan will cycle
between high, medium and low
speeds for 5 seconds each. If the
fan speed is set to medium, the fan
OPERATION
will cycle between medium and low.
If set to low, the fan will cycle
between low and off.
Sleep mode:
is shown and if
set at high speed the fan will first
work at high speed nature mode for
30 min, then at medium speed
nature mode for 30 min, then
continue working at low speed
nature mode.
Touch the
button on the control
panel to enable the swing function. The
control panel will display the
symbol and the fan will swing from side
to side in a 90° arc. Touch again to stop
oscillation.
Note: Do not force or hinder the
oscillation movement !
Swing Function
®
SEELEY INTERNATIONAL
–
OWNER
’
S MANUAL
4
4
MODE
OFF
SWING
ON/SPEED
Z
Z
OFF
ON/SPEED
MODE
SWING
TIMER
SHIFT
FAN1
FAN2
FAN3
1
2
3
Z
Z
TIMER
Timer Function
Shift Function
The fan has a timer function that will
turn off the fan. By touching the
button 0.5 to 7.5 hour delays are
available.
The timer will count down as it
progresses - i.e. if 2 hours is set, after
30 minutes 1.5 hours will show as the
remaining time on the display. To
cancel, touch the
button until
the timer indicators are no longer lit.
As well as the fan speed control, the fan
is also equipped with the ability to turn
each of the three different fans on or off.
Touch the
button.
“
FAN1
”
,
“
FAN2
”
and
“
FAN3
”
will flash on the
display for 5 seconds.
During this time, touch the
,
or
buttons to turn FAN1, FAN2 or
FAN3 off or on.
NOTE: if all fans are turned off, this is
the same as touching the
button.
OPERATION - MAINTENANCE
SHIFT
TIMER
MODE
SWING
OFF
TIMER
Maintenance
To maximise the efficiency of the fan,
clean the inlet and outlet grilles
regularly.
•
Unplug the fan from the mains power
supply before cleaning.
•
Use a soft, damp cloth to wipe the
outside. Never use thinners or other
strong chemicals on the fan surfaces.
•
Use a vacuum cleaner to remove dirt
and dust from the inlet and outlet
grilles.
•
Ensure the fan is dry before plugging
back into the mains power supply.
As the policy of this company is one of continuous improvement, all specifications
are subject to change without notice.
Waste electrical products must not be disposed of with household
waste. This product should be taken to your local recycling centre for
safe treatment.
