Convair CoolTower CTF03, Руководство пользователя

Страница: 5 / 8

Component List
1 Upper Fan
2 Lower Fan
3 Handle
4 Upper Fan Control Knob
5 Lower Fan Control Knob
6 Power Cord & Plug
7 Base Stand
8 Locking Nut
9 Decorative Strips
Assembly
Unpack the fan and check that you have
all of the components.
Clip the decorative strips into the fan
base, ribbed side downwards.
Remove the locking nut from the fan.
Align the holes on the base to the
locating pips on the fan, then fix firmly
with the locking nut (Fig 2).
2 CTF03
ASSEMBLY
Operation
There are two independent fan controls
on the control pad, allowing you to
operate the upper and lower fans.
Select the desired fan speed by rotating
the control knob to the desired selection.
Your selection is indicated by the “ ” on
the control knob.
Each fan has 3 speeds - refer to Fig 3 and
the selections below :-
0 Off position
1 Speed Low
2 Speed Medium
3 Speed High
You can adjust the fan angles as shown in
Fig 4
A. Left to Right, 90°
B. Up and Down, 120°
C. Pivot through the centre, 180°

Fan Positions
OPERATION
®
SEELEY INTERNATIONAL
–
OWNER’S MANUAL 3
1
4
2
3
Rib side down
Align pips to holes in base
Unit Controls
1
2
7
8
4
4
5
6
9
A
0
1
2
3
0
1
2
3
B C