INSTRUCTIONS
888-Convaid (266-8243)
www.convaid.com
4
5
Cruiser 10
Cruiser 10
Close-up
One Piece Height Adjustable Push Handle with Attendant
Handbrake
1. Remove cable from lever by pulling the cable away from the lever & routing the inner
cable off the lever.
2. Using a phillips screwdriver and a 3/8” wrench, remove the screw attaching the
handle tube assembly from the Cruiser Back Tubes.
3. Slide existing handle assembly off.
4. Slide new handle assembly onto the back tube.
Item 1
5. Align the holes on the plastic pivot joint of the handle tube assembly with the holes of
the back tubes.
6. Insert new screw
Item 3
into pivot joint.
7. Attach the nut
Item 2
and tighten using a phillips screwdriver and a 3/8” wrench.
Attached cable onto the lever on the new handle.
3
2
3
1
One Piece Height Adjustable Push Handle
with Attendant Handbrake
Assembled
Cruiser Back Tube
Cruiser Back Tube
FRAME
Item Description
Qty
1
CX-10 Attendant Brake Handle Assembly
1
2
Locknut #10-24 Jam Flexlock
2
3
Screw #10-24 x 1-1/4" Phil Pan
2
995914
#
Kit Includes
3
3
1
2
