Grip the mounting on both sides of the
hole and bend the pipe upwards, ensure
that the mounting is in front of the pipe.
HK
Insert the pipe with the mounting, from
the inside through the hole in the front
edge of the foot plate.
HK
Be careful with the pipe, it is fragile.
Insert the fan in the rectangular opening in the foot plate. The rear edge of the fan must be supported against the opening in the foot plate
and the front edge is secured in the vibration dampers. Screw into place using M6x8 screws. Check that the rubber strip on the fan is against
the edge of the opening in the foot plate otherwise noise will occur.
!
GB
10