GB
71
SELF-CLOSING DOOR
Heat deflector
The heat deflector is removed by lifting the front edge and
then pulling it out slightly. Lower it so that it is below the
insert and then withdraw it. Assembly takes place in the
reverse order. Ensure that the rear lugs are secured in the
slits on the upper leg as illustrated above.
Self-closing door
The stove is equipped with a spring to close the door auto-
matically. The spring is situated above the heat deflector.
The closing force of the hatch can be adjusted by moving
the spring between the three notches on the lever. After
adjustment, the heat deflector must be reinstalled. The an-
gle of the stove also affects the closing force of the spring.
If the spring force seems weak despite the spring being
mounted at the end of the lever, the angle of the stove
should be checked.