Contura 750 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 28

Contura 750 Скачать руководство пользователя страница 6

HETAS Ltd Approval;

These appliances have been approved by HETAS Ltd as an intermittent operating appliance for burning wood logs
only.

WARNING NOTE

Properly installed, operated and maintained this stove will not emit fumes into the dwelling. Occasional fumes from
de ashing and re fuelling may occur. However, persistent fume emission is potentially dangerous and must not be
tolerated. If fume emission does persist, then the following immediate action should be taken:

(a)

Open doors and windows to ventilate the room and then leave the premises.

(b)

Let the fire go out.

(c)

Check for flue or chimney blockage and clean if required

(d)

Do not attempt to relight the fire until the cause of the fume emission has been identified and corrected.

If necessary seek expert advice.

The most common cause of fume emission is flueway or chimney blockage. For your own safety these must be kept
clean at all times.

IMPORTANT NOTES

General

Before lighting the stove check with the installer that the installation work and commissioning checks described
above have been carried out correctly and that the chimney has been swept clean, is sound and free from any
obstructions. As part of the stoves’ commissioning and handover the installer should have shown you how to operate
the stove correctly.

811142 BAV GB-7

March 2014

«
...
4
5
6
7
8
...
»

Содержание 750





























Отзывы:

Нет отзывов