Controlled power company MODEL ES Скачать руководство пользователя страница 29

Страница: 29 / 57

OPERATION

INTELLISTAT TS

MONITOR DESCRIPTION

- High / Low Input Voltage

- High / Low Output Voltage

- High Output Volt-Amperes

- High / Low Output Frequency

- High / Low Battery Voltage

- High Battery Charge Current

FEATURES

INVERTER STATUS AND ALARM INDICATORS

- LCD display of all electrical parameters.

- NFPA compliant automatic battery testing and logging.

- User programmable automatic system testing.

- System alarm annunciation.

- Audible alarm with alarm silence.

- Alarm status display.

- Email / Cell phone status notification.

- Optional fax / email / voice / web page reporting of test results.

- Date and time display.

- Auto logging of test results / events.

- Multi layer password protection.

- Remote monitoring capabilities.

- Programmable local interfaces.

- Logs up to 50 events.

- Non volatile clock and memory.

- Programmable alarm set points.

- System Normal

- General Alarm

- System on Battery

- Low Battery Warning

- Low Battery Shutdown

- Battery Test in Process

- Output Volt-Amperes

- Output Watts

- Output Power Factor

- Auto Battery Test Failed / Passed

- Output Circuit Breaker Open

- Charger Fail / DC Open Circuit

- System in Static or Manual Bypass

- REPO Active

MEASURED PARAMETERS

- Battery Charger Current

- Battery Capacity Remaining

- Input Voltage

- Output Voltage

- Output Current

- Output Percent Load

- Output Frequency

- Battery Voltage

ADVANCED DIGITAL MONITORING -

The user-friendly Intellistat TS

monitor provides quick, full access to all of

the monitor features, and also allows all programming to be done directly from the monitor. An easy to read LCD

indicates all the electrical parameters, as well as the functional status of the inverter. A virtual keypad allows the

entry of date / time values, system set points and password information into the monitor, without the need for an

external computer and cable.

The Intellistat TS

Intelligent status monitoring a UPS’s operational status is critical for maintaining operational

efficiency, as well as for monitoring the power feeding the computer systems. With this in mind, Controlled Power

Company designed the model

“ES”

with state of the art monitoring features to provide complete system diagnostics

and testing with access to all electrical system parameters.

AUTOMATIC SYSTEM TESTS -

The Intellistat TS

Monitor automatically performs a user defined (date and time)

30 second system test every 30 days; as well as a user defined (date and time) annual 60 second system test. For

all of these tests, the Intellistat TS

Monitor logs the test results with the date and time, as well as a “pass” or “fail”

indication.

MANUAL SYSTEM TESTS -

The Intellistat TS

Monitor

also allows the user to manually invoke a user defined

system test for 30 seconds.

Содержание MODEL ES


























































Результаты поиска

Содержание MODEL ES

Отзывы:

Похожие инструкции для MODEL ES

Бренды по названию

Популярные бренды

Controlled power company MODEL ES, Руководство пользователя

Результаты поиска

Содержание MODEL ES

Отзывы:

Похожие инструкции для MODEL ES

Бренды по названию

Популярные бренды