Installation and Setup
XW-110™ WiFi Temperature Sensor Users Manual
to the DHCP server so you can obtain the IP address that was assigned.
To begin, press the WPS button on your wireless router or access-point. You will generally have about
two minutes to connect wireless devices to the network with WPS. Now remove the cover of the XW-110
and press the “WPS” push button. After a few seconds, the XW-110 should register itself with the router
or access-point. If WPS fails, the XW-110 will automatically enter the access point mode.
The XW-110 will use DHCP to obtain an IP address after a successful WPS association. Additionally,
the connection information is also broadcast using mDNS. If you need to access the XW-110 using its
internal web server you will need to obtain the IP address that was assigned to the XW-110 through your
DHCP server or router. Alternatively, if using an mDNS capable device, it may be accessed by entering
the appropriate URL into the address bar of your web browser:
http://xw-110.local/setup.html
http://xw-110p.local/setup.html
Page 10
Xytronix Research & Design, Inc.
Содержание XW-110
Страница 1: ......
