19
Heating Program
1 - Slide the system switch to the HEAT position and press the PROG key once. The P1 and SET symbol will
appear on the display. MO to FR symbol is shown indicating weekday program is being displayed.
(See figure 3 on page 20).
2 - Use AHEAD or BACK to select the desired start time for weekday program 1.
3 - Use UP or DOWN to set the desired temperature.
4 - Temperature can be set in increments of 0.5º.
5 - Program time can be set in increments of 10 minutes.
6 - After setting correct time and temperature for program 1, press PROG again to display weekday program 2.
Repeat steps 2-5 for weekday programs (P2, P3 and P4) for Saturday and Sunday programming. Use same
method to set the desired time and temperature for program 2.
7 - Repeat the procedures for weekday program 3 and 4, and weekend programs 1-4. (See figure 4 on page 20).
8 - After complete setting of all 8 programs, press PROGRAM to return to normal display (SET symbol will
disappear). Leaving the thermostat without any keys pressed for 16 seconds while setting will also return the
display to normal.
NOTE:
• The PROGRAM key can also be used anytime to review all the set programs.
• To terminate the programming sequence at anytime, press DISPLAY key.
Programming
