Control Techniques Modbus RTU, Руководство пользователя

Страница: 8 / 12

Modbus Registers Modbus RTU Module
9 Modbus Registers
Register Description Bits Details
40002 Command
(single write)
0 to 2 To send a command to the starter, write the
required value:
1 = Start
2 = Stop
3 = Reset
4 = Quick stop (coast to stop)
5 = Forced communication trip
3 to 7 Reserved
40003 Starter state 0 to 3 1 = Ready
2 = Starting
3 = Running
4 = Stopping
6 = Tripped
4 1 = Positive phase sequence
5 1 = Current exceeds FLC
6 Reserved
7 0 = Communications are ok
1 = Communications device fault
40004 Trip code 0 to 7 See Trip Codes on page 6
40005 Motor current 0 to 7 Average 3-phase motor current (A)
40006 Motor temperature 0 to 7 Motor thermal model (%)
40007 Product information 0 to 2 Reserved
3 to 7 Product type code:
4 = Compact soft starter
40008 Serial Protocol
Version
0 to 7 Communication protocol between module
and starter
9.1 Trip Codes
Trip
Code
Description
1 Excess start time
2 Motor overload
3 Motor thermistor
4 Current imbalance
5 Frequency
6 Phase sequence
8 Power circuit
15 Starter communication (between device and soft starter)
16 Network communication (between device and network)
33 Time-overcurrent (Bypass overload)
255 No trip
6