Quick Guide
–
iDFlex
–
Version 3.0 EN
–
Control iD 2020 ©
The pin on the fixed part enters the metal plate
preventing the door from opening.
In this guide, the solenoid pin lock will be represented
by:
⚠
The gray terminals may not be present in all locks.
If there is a power supply connection (+ 12V or + 24V),
it is essential to connect it to a source before
operating the lock.
Electromechanical Lock
The electromechanical lock or strike lock consists of a
latch connected to a solenoid through a simple
mechanism. After opening the door, the mechanism
returns to its initial state allowing the door to be closed
again.
Thus, the electromechanical lock typically has two
terminals connected directly to the solenoid. When
current passes through the lock, the door will be
unlocked.
In this guide, the electromechanical lock will be
represented by:
⚠
Confirm the operating voltage of the lock before
connecting it to the iDFlex! Many electromechanical
locks operate at 110V/220V and must therefore use a
different wiring set up.
Wiring Diagrams
iDFlex and EAM (Mandatory)
Magnetic Lock
Solenoid Pin Lock (Fail Safe)
⚠
We recommend the use of a dedicated power
supply source to power the Solenoid Lock.
Reference pattern for installation
Electromechanical Lock (Fail Secure)
⚠
We recommend the use of an exclusive power
supply source to power the Electromechanical Lock.
Push Button
Door Sensor
Diode
Power Supply
+12V/1A
Diode
Power Supply
+12V/1A
Diode
Power Supply
+12V/1A
