11
Multi
Tracker
Temperature units
Following temperature units are available; °C, °F, or °K.
Press
to open the menu and step down with
. Select ”SETUP” with
. Step down with
. Select ”Temp. unit” and confirm with
. Step
upwith
or downwith
until desired unit (C, F, K). Confirm with
.
When all settings are done, exit with
until one of the two main windows
appear (text mode or profile mode).
Concentration Units
Following units for sludge concentration are available; g/l, mg/l, %, and ppm.
Press
to open the menu and step down with
. Select ”SETUP” with
. Step down with
and selsct ”Conc unit”. Confirm with
. Step
upwith
or down with
until desired unit (g/l, mg/l, %, ppm). Confirm
with
. When all settings are done, exit with
until one of the two main
windows appear (text mode or profile mode).
Depth units
Following depth units are available; cm, dm, m, in, ft with inches.
Press
to open the menu and step down with
. Select ”SETUP” with
. Step down with
. Select ”Depth unit” and confirm with
. Step
upwith
or downwith
until desired unit (cm, dm, m, in, ft with
inches). Confirm with
. When all settings are done, exit with
until
one of the two main windows appear (text mode or profile mode).
Log
Up to 250 measurements may be stored in the MultiTracker internal memory. Every
stored measurement is saved and it contains all data available at the actual
measurement. Each individual line in the log may be tagged with 10 alphanumerical
characters; e.g. Clarifier 2; Thickener 5, etc. “Location” shows the field you are working
at the moment. “Show” shows a list of all the stored data at the above named Location
or Field. Empty and delete are local commands and will only effect the current Location
or Field you are working in. Create will create a new Location or Field.
Содержание Cerlic MultiTracker
Страница 35: ...35 Multi Tracker Oxygen Solubility chart...
