11
WARNING!
Connecting speaker wires or input
cables while the Multi Channel Amplifier is powered,
may cause shock and could damage the amplifier.
Connect Audio Input Sources and
Speakers
1.
Ensure the amplifier power cord is unplugged before
connecting speakers and audio sources.
2.
Connect up to eight stereo audio source devices to
the RCA line level input jacks (the top row of
connector on the back of your amp). Sources may
include line level audio outputs from devices such as
a Control4 Home Theatre Controller or Media
Controller, tuners, CD or tape players, etc. Use the
worksheet on the previous page to keep track of
which source is connected to which amplifier input.
3.
Connect speakers to the audio output jacks. Tighten
the binding posts to ensure a good electrical
connection to the speaker wires (even if you are
using banana plugs, it is important to tighten the
binding posts). Do not bridge outputs. The outputs on
the C4-16AMP3
cannot
be bridged. Do not connect
black terminals together. Do
not
connect the black
terminals to ground. The black terminals are not at
ground potential and connecting them together or to
ground can damage the amplifier. Use the work sheet
on the previous page to keep track of which speaker
zones are attached to which amplifier output
channels.
