2
Environmental
Operational
temperature
32°F ~ 104°F (0°C ~ 40°C)
Humidity
5% to 95% non-condensing
Storage
-4°F ~ 158°F (-20°C ~ 70°C)
Miscellaneous
Dimensions without
rack-mount kit
(H×W×D)
2U
17.32
"
× 3.43
"
× 9.69
"
(440 mm × 87 mm × 246 mm)
Dimensions with rack-
mount kit (H×W×D)
3U
20.79
"
× 5.39
"
× 9.69
"
(528 mm × 137 mm × 246 mm)
Power requirements
115/230 VAC, 50~60 Hz
WARNING!
Do not expose the apparatus to
dripping or splashing. Do not place objects
filled with liquids near the apparatus.
AVERTISSEMENT
! N’exposez pas l’appareil à
l’égoutture ou à l’éclaboussement. Ne placez
pas les objets remplis de liquides près de
l’appareil.
WARNING!
To reduce the risk of fire or
electrical shock, do not expose this apparatus
to rain or moisture.
AVERTISSEMENT
! Pour réduire le risque du
feu ou de choc électrique, n’exposez pas cet
appareil à la pluie ou à l’humidité.
IMPORTANT!
Using this product in a manner
other than outlined in this document voids
your warranty. Further, Control4 is NOT liable
for any damage incurred with the misuse of
this product. See “Warranty.”
IMPORTANT
! Employer ce produit en quelque
sorte autre que décrit dans ce document vide
votre garantie. De plus, Control4 n’est pas
responsable d’aucun dommage encouru avec
l’abus de ce produit. Voyez que « garantie. »
Features and Benefits
• Receives up to four (4) (4-Zone Power Amplifier)
or eight (8) (8-Zone Power Amplifier) stereo
inputs, plus one global input.
• Outputs four (4) (4-Zone Power Amplifier)
or eight (8) (8-Zone Power Amplifier) class D
amplified stereo zones at 55W per channel at
eight (8) ohms or at 100W per channel at four
(4) ohms (two channels driven simultaneously).
Outputs 200W per zone at eight (8) ohms in
bridged mode. Amplifier cannot support 4-ohm
loads in Bridge mode.
• Manually adjustable input gain for each zone.
• Manually adjustable input gain for global input.
• Each zone has independent line level inputs and
outputs.
• Each zone has Phoenix-style amplified outputs
for reliable connectivity.
• Auto-sense inputs when Trigger is off.
• Trigger enables discrete standby control of
amplifier.
• Device chassis is two (2) standard rack spaces
and rack mountable using three (3) standard rack
spaces configuring to EIA 19” rack standards.
Installing a Rack-mount Bracket
1
Slide the rack-mount bracket onto the amplifier.
Align the holes on the bracket edge with the
holes on the amplifier.
2
Mount the bracket using eight (8) 8-32 x 3/8”
flat-head screws (included).
