™
Note:
Attach the ground wire to the wall box in
the location indicated by the Ground symbol.
4
Go to the ‘Installation’ section next for more
instructions.
Installation
1
Insert the grounding screw into the back of
the adapter plate (metal model). Secure the
grounding wire to the grounding screw.
2
Place the metal adapter plate on top of the back
box, and screw it onto the back box using the
two (2) screws that were used to hold the old
Touch Screen in place.
3
Insert the screws in the opposite corners of the
plate (see photo below).
4
Follow the installation instructions in the
5” and
7” In-Wall Touch Screen Installation Guide
to
attach the high or low-voltage connections to the
power box before you attach the 7” In-Wall Touch
Screen to it. The use of high or low voltage will
depend on your installation requirements.
5
Remove the two (2) sheet metal screws from the
power box, and use the two (2) screws included
7” In-Wall Touch Screen-
Adapter Kit for Mini
Touch Screen
Installation Guide
in the kit to attach the power box to the adapter
plate.
6
Insert the 7” In-Wall Touch Screen’s power box
into the adapter plate’s hole and screw it in place
(see the next photo).
7
Attach the new 7” In-Wall Touch Screen.
Warranty
Limited 2-year Warranty. Go to http://www.control4.
com/warranty for details.
About This Document
Part number: 200-00200, Rev. F 7/06/2011
Screw
hole
Screw
hole
Adapter
plate
Insert Power Box here
