background image

ITEM

 

DESCRIPTION

 

Electrical Requirements

 

6.5hp 3000 watt w/ peak surge wattage of 4000w

 

Engine Type

 

Electronic ignition system, recoil start 4 Cycle

 

Alternator

 

Two Pole / Single Phase / 60 Hz

 

DC voltage

 

DC Output 12v @ 8.3amps

 

Fuel Tank

 

4 gallon tank capacity

 

Estimated Run Time

 

7.8h continuous run time

 

Overall Dimensions

 

24.25x17.25x18 in

 

Weight

 

101 Lbs.

 

SAVE THIS MANUAL

 

You will need this manual for the safety warnings and precautions, operating, inspection, 
maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice 
with this manual. Write the invoice number on the inside of the front cover. Keep this manual 
and invoice in a safe and dry place for future reference.

 

 

WARNING!

 

The warnings, cautions and instructions discussed in this instruction manual 
cannot cover all possible conditions and situations that may occur. It must be 
understood by the operator that COMMON SENSE AND CAUTION ARE FACTORS 
WHICH CANNOT BE BUILT INTO THIS PRODUCT, BUT MUST BE SUPPLIED BY 
THE OPERATOR.

 

GENERAL SAFETY RULES 

WORK AREA

 

1. 

Keep your work area clean and well lit. 

Cluttered benches and dark areas invite accidents. 

2. 

Do not operate generators in explosive atmospheres, such as in the presence of flammable 
liquids, gases, or dust. 

Generators create sparks, which may ignite the dust or fumes. 

3. 

Keep bystanders, children, and visitors away while operating a generator. 

Provide barriers or 

shields as needed. 

4. 

Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, 
clothing, and gloves away from moving parts. 

Loose clothes, jewelry, and long hair can be caught in 

moving parts. 

-1 -

 

Содержание GEN4000/03237









Отзывы: