PAGE 9
ELECTRICAL PRECAUTIONS
1.
All connections and conduits from the Generator to the load must only be in-
stalled by trained and licensed electricians, and in compliance with all relevant
local, state, and federal electrical codes and standards, and other regulations
where applicable.
2.
The Generator must be earth-grounded for fixed installations in accordance with
all relevant electrical codes and standards before operation.
3.
If an extension cord (not included) is used, make sure to use only UL
approved
cords having the correct gauge and length.
(See Figure A.)
REQUIRED MINIMUM EXTENSION CORD GAUGE – 120 VOLT
NAMEPLATE
AMPERES
(At Full Load)
EXTENSION CORD LENGTH
0 - 25
Feet
25 - 50
Feet
50 -100
Feet
100 – 150
Feet
150– 200
Feet
0 - 5
16
16
16
12
12
5.1 - 8
16
16
14
10
-
8.1 - 12
14
14
12
-
-
12.1 - 15
12
12
10
-
-
15.1 - 20
10
10
10
-
-
20 - 47
6
-
-
-
-
FIGURE A
4.
Do not attempt to connect or disconnect load connections while standing in
water, or on wet or soggy ground.
5.
Do not touch electrically energized parts of the Generator and interconnecting
cables or conductors with any part of the body, or with any non-insulated
conductive object.
6.
Connect the generator only to a load or electrical system (110/120 volt) that is
compatible with the electrical characteristics and rated capacities of the Genera-
tor.
7.
Before servicing equipment powered by the Generator, disconnect the equipment
from its power input.
R
The 120v outlet is protected with a 47 amp breaker. You must
provide adequate protection for the size of cord and equipment you are using
by means of a power strip equipped with a circuit breaker.
WARNING!
Содержание GEN03213
Страница 1: ...8000W GENERATOR 8000W GENERATOR Stock No GEN8000 03213 Instruction Manual...
Страница 19: ...PAGE 19...
Страница 21: ...ASSEMBLY DIAGRAM A PAGE 21...
Страница 22: ...WIRING DIAGRAM PAGE 22...
