Front Loading Combo
Model No.: RV-WD900S (TITANIUM)
6. Reconnect the inlet pipe.
Washing the filter in washing machine:
1. Screw off the inlet pipe from the backside of the machine.
2. Pull out the filter with long nose pliers
and reinstall it back after being
washed.
3. Reconnect the inlet pipe.
4. Open the tap and make sure there is
no water leakage.
5. Close the tap.
Pull out the power plug to avoid
electrical shock before washing. After using the washing
machine, pull out the power cord and close the door tightly
to avoid pinching the kids.
Remove foreign matters
Drain Pump Filter:
Drain pump filter can filter the yarns and small foreign matters from
the washings.
Clean the filter periodically to ensure the normal operation of
washing machine.
According to the soil level within the cycles and the frequency
of the cycles, you have to inspect and clean the filter regularly.
The pump should be inspected if the machine does not
empty and/or spin; The machine makes an unusual noise
during draining due to objects such as safety pins, coins etc.
blocking the pump
P.25
P.26
Care And Cleaning
Care And Cleaning
Care and cleaning
Care and cleaning
Before your maintenance starts, please do pull out the power plug or disconnect power
and close the tap.
WARNING
- Solvents are forbidden to avoid that the washing machine is damaged, and
toxic gases are generated or exploded.
- Never use water to sprinkle and wash the washing machine.
- It is forbidden that the detergents containing PCMX are used to clean the
washing machine.
- Certain internal parts are intentionally not grounded and may present a risk of
electric shock only during servicin. Service Personnel-Do not contact the
following parts while the appliance is energized:
Electrical value,Drain Pump,
Door Lock,Dry Heater(Combo),Fan Motor(Combo).
Cleaning and Maintenance of Washing Machine Cabinet
Proper maintenance on the washing machine can extend its working life. The surface can
be cleaned with diluted non-abrasive neutral detergents when necessary. If there is any
water overflow, use the wet cloth to wipe it off immediately. No sharp items are allowed to
strike the cabinet.
Notes: formic acid and its diluted solvents or equivalent are forbidden.
Clean Internal Drum
The rusts left inside the drum by the metal articles shall be removed immediately with
chlorine-free detergents.
Never use steel wool.
Dispose a Frozen Washing Machine
When the temperature drops below zero and your washing machine gets frozen, you may:
1.Disconnect the power supply for the washing machine.
2.Wash the tap with warm water to loosen inlet pipe.
3.Take down inlet pipe and immerse it in warm water.
4.Pour warm water into washing drum and wait for 10 minutes.
5.Reconnect inlet pipe to the tap and check whether inlet and outlet are working normally.
Notes: when the washing machine is reused, make sure the ambient temperature is above 0 C
Anti-freeze
If your washing machine is located in the room where it can get frozen easily, please drain
the remaining water inside drain pipe and inlet pipe thoroughly.
Remove the remaining water in inlet pipe
:
1.Close the tap.
2.Screw off the inlet pipe from tap and put its end into the container.
3.Start up any procedure except single Wash or Drain
procedure. Water will be drained out of inlet pipe if any
for about 40 seconds.
4.Reconnect the inlet pipe to tap.
Remove the remaining water in drain pump
T
o avoid burning, it shall be done after the hot water
inside the machine cools down.
WARNING
Clean detergent box and grooves
Clean detergent drawer and grooves
1.Press down the arrow location on softener cover
inside the drawer.
2.Lift the clip up and take out softener cover and wash
all grooves with water.
3.Restore the softener cover and push the drawer into
position.
Clean inlet filter
Inlet filter shall must be cleaned if there is not any or
insufficient water in when the tap is opened.
Clean the tap filter:
1.Close the tap.
2.Select any procedure except “Wash” or “Drain”
procedure.
3.Press the button “Start/Pause” and keep the
procedure running for about 40 seconds.
4.Remove the inlet pipe from the tap.
5.Use water to wash the filter.
6.Reconnect the inlet pipe.
Washing the filter in washing machine:
1.Screw off the inlet pipe from the backside of the
machine.
2.Pull out the filter with long nose pliers and reinstall
it back after being washed.
3.Reconnect the inlet pipe.
4.Open the tap and make sure there is no water leakage.
5.Close the tap.
P.27
P.28
Care And Cleaning
Care and cleaning
WARNING
Pull out the power plug to avoid electrical shock before washing.
After using the washing machine, pull out the power cord and close the door
tightly to avoid pinching the kids.
Remove foreign matters
Drain Pump Filter:
Drain pump filter can filter the yarns and small foreign matters from the washings.
Clean the filter periodically to ensure the normal operation of washing machine
.
According to the soil level within the cycles and the frequency of the cycles, you have
to inspect and clean the filter regularly.
The pump should be inspected if the machine does not empty and/or spin;
The machine makes an unusual noise during draining due to objects such as safety
pins, coins etc. blocking the pump.
WARNING
The Service_panel proceed as follows:
When the appliance is in use and depending on the programme selected there can be hot water in
the
pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished
the cycle, and is empty. When replacing the cover, ensure it is securely retight end so.
Warning!
Open the lower cover cap
Rotate
90
°
C
and
pull
out
the
emergency drain hose,
and take off the hose cap
Open the filter by turning
to the counter clockwise
Remove extraneous matter
1
2
3
Close the lower cover cap
6
5
4
Emergency
drain hose
After
water
runs
out,reset
the
drain
hose
Care And Cleaning
1
.
O
pen filter door
Emergency door pull cord
2
.
Emergency pull cord
Emergency Door Release
Care and cleaning
In case of power failure or other circumstances and door cannot be opened. If it is
necessary to open the door under this circumstances, please pull down the pull cord
inside emergency door and restore the pull cord after opening the door.
The machine is not allowed to use the emergency switch pull cord during washing. If need to run machine
urgently, it is recommended to open door after water is cooled, to avoid getting burn caused by high
temperature residual water outflow from the machine tub
Warning!
