3
Battery Installation
Combat Commando Battery Installation
1. Use a screwdriver to unscrew the battery cover and open it.
2. Attach the battery to the connector.
3. Screw the cover back onto the body.
Transmitter Battery Installation
1. Use a crewdriver to open the battery cover.
2. Place 4X 1.5V AA Batteries (Not included) with the corresponding polarities as labeled on the
unit.
3. Close the battery cover and tighten the screw.
Pairing and
Connecting the
Remote
1. Flip the ON/OFF switch on the Battle
Brain to the ON position
2. Turn on the remote by pressing the
Power Button on the bottom center of
the remote.
Battle Brain and Remote Control
Frequency Matching
takes 2-3 seconds and the indicator light turns off once the matching process is complete.
You can mix up to 20 Combat Commandos in the same area, however signal interference may
occur.
If the Battle Brain isn’t responding to your remote, please turn off both and try again.
2 or more Battle Brains can be paired to one remote. Simply Follow the steps above to pair
your remote with as many Battle Brains as you have.
