- 13 -
Step 3: Connect App
— Connect your smartphone to the WiFi of the drone and check the drone’s
status on the “Con�xo - F24 - XXXX ” app.
— Open the “Con xo F22” applica on on your smartphone to access the
control interface.
Con�xo - F24 - XXXX
Step 2: Turn On The Remote Control & Pair With Drone
— Power on the remote control and push the le� joys�ck up then
down to pair with the drone.
— When the lights flash blue (back) and white (front), pairing was successful.
Thro
�
le Joy
s�
ck
NOTE: You can connect to the drone WiFi signal at this �me to view the
current drone on the Con�xo F22 app, or wait un�l a�er GPS is calibrated.
Flight
Step 1: Turn on the drone and set down on a level surface
— The drone will auto-trim to this level surface.
— All lights blinking red.