
Securing Seat Back Bracket to Main Frame Bracket
Echo Only
Connecting Brackets
1)
Gently rotate seat back slightly past a straight vertical position. Engage both metal seat
brackets until holes on both brackets align. Two (2) clevis pins (supplied) must be used
to safely join and secure both brackets. (See Figure 3)
2)
When all four (4) holes are aligned, insert both clevis pins through each set of holes.
Push clevis pins as far as possible exposing the small holes located on the opposite
end of each clevis pin. Firmly insert the hairpin cotter pins into each of the small holes
thus securing both clevis pins in place. (See Figure 3 once again)
Attaching Seat Cushion to Main Frame
1)
Locate seat bottom cushion.
2)
Fully recline chair and attach bottom cushion by aligning the cushion with
Velcro
®
strips (supplied). Make sure seat cushion is pushed back tight against the
seat back between left and right mounting brackets. There should be no visible gaps between
the two (2) cushions.
Note: There is also a separate instruction sheet dealing with this issue.
It was attached to the seat cushion at time of manufacture.
ECHO
™
PEDICURE CHAIR
© 2012, Continuum Footspas, LLC
March, 2012
Clevis Pin
Hairpin Cotter Pin
Figure #3