Continental Refrigerator XT 1.0, Оригинальное руководство пользователя

Страница: 10 / 16

10 Contononta netin Synne DI PLAY
MCbtan vtnw/tunC vtnw
As well as CeBS trip data, the mobile view also
displays additional information (e.g. navigation,
etc.). You can select which additional values are
displayed using the app on your smartphone.
The Bluetooth®-enabled display can be linked to
the Continental smartphone app. The Continental
app is available for iOS and Android devices and
can be downloaded free of charge. Refer to the
Continental smartphone app for information on
linking your phone with the CeBS. You can find
additional information on the mobile view and
display data in the descriptions in the app.
NOTE: If you have selected mobile view , the
display remains in the mobile view, even if a
smartphone is not linked. The message "Link your
cycle or download the Conti app" appears on the
display together with a QR code connected to
the app. General information about the cycle is
displayed (battery, light, speed, support level).
If you have selected
auto view , the display auto-
matically switches from the normal view to the
mobile view when a smartphone is linked.
5.1.2 Aatgotog nhn dtypatS Co nhn
htodanbtr
Display model XT 2.0 is bolted directly to the
handlebar stem cap. The display can be tilted
back and forwards with ease (screw tightening
torque: 3.5 Nm).
The display holder for display model XT 1.0 can be
aligned on the handlebar in two ways:
A
: In the direction of travel
B : Opposite to the direction of travel
A B
Fig.: Alignment of display holder XT 1.0
If necessary, adjust the alignment of the display
holder as follows:
1. Loosen the fastening screws and remove the
display holder from the handlebar.
Fig.: Removing the display holder from the
handlebar XT 1.0
2. Loosen the screws on the display holder and
then remove the display.
Fig.: Removing the display from the holder
XT 1.0
3. Turn the display 180° and then fit all the
components again (torque for fastening the
display on the handlebar: 3 Nm / torque for
fastening the display in the display holder:
1 Nm).