Teledyne Continental Motors, Inc.
TM
Maintenance
Inspections
Table 7-8.
100-Hour Engine Inspection Checklist
Engine Model Number: ___________________ Engine Serial Number: _________________
Total Time Engine Has Been in Service: _______________
Time Since Major Overhaul (TSMOH) __________________ Engine in Storage? ________
Date Inspection Performed: ________ Inspection Performed by:_____________________
Complete the 100-hour inspection according to the instructions in the Maintenance Manual; heeding all
warnings, cautions and notes. Initial the block beside the procedure upon completion. Note discrepancies in
the Inspector Comments column.
Inspection Item
Initials Inspector Comments
Engine Operational Check (Section 6-1)
Oil Consumption and Trend Monitoring
Oil Analysis Profile Established? (Section 9-1.4)
Oil Analysis Laboratory used?
Date of last oil sample analysis:
Silicone content of last sample:
Oil consumption quantity noted during oil change:
Is oil consumption excessive?
T
Yes
T
No
Visual Inspection (Section 7-3.6)
Accessory Mounting and Security Inspection
(Section
Cylinder Inspections (use Cylinder Inspection
Checklist) (Section
Crankcase Inspection (Section 7-3.8)
Induction System Inspection (Section 7-3.9)
Ignition System Inspection (Section 7-3.10)
FADEC Backup Battery Inspection (Section 7-3.11)
Fuel System Inspection (Section 7-3.12)
Engine Gauge Inspection (Section 7-3.13)
Engine Control Linkage Inspection (Section 7-3.14)
Cylinder Drain Inspection (Section 7-3.15)
Throttle Position Switch Inspection (Section 7-3.16)
Page 1 of 2
IOF-240 Series Engine Maintenance Manual
7-57
31 August 2007
Change 1