supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de
l'émetteur.»
5.
Instructions to OEMs:
Continental must instruct the automotive OEM and provide them to include the follow
information into the car user’s manual (i.e. for the DCM):
1. End-users must be provided with transmitter/antenna installation requirements and
operating conditions for satisfying RF exposure compliance:
2. A separate section should clearly state “FCC RF Exposure requirements:”
3. Required operating conditions for end users.
4. The antenna used with this device must be installed to provide a separation distance of at
least 20cm from all persons, and must not
transmitter, except in accordance with FCC multi
5. The Maximum ERP/EIRP and maximum antenna gain required for compliance with Parts
15, 22H, 24E, and 27.
6. Clear instructions describing the other party’s responsibility to obtain station licensing.
FCC ID: LHJ:FANW, IC: 2807E-FANW
supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de
Continental must instruct the automotive OEM and provide them to include the follow
information into the car user’s manual (i.e. for the DCM):
users must be provided with transmitter/antenna installation requirements and
operating conditions for satisfying RF exposure compliance:
A separate section should clearly state “FCC RF Exposure requirements:”
Required operating conditions for end users.
The antenna used with this device must be installed to provide a separation distance of at
least 20cm from all persons, and must not transmit simultaneously with any other
transmitter, except in accordance with FCC multi-transmitter product procedures.
The Maximum ERP/EIRP and maximum antenna gain required for compliance with Parts
ing the other party’s responsibility to obtain station licensing.
supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de
Continental must instruct the automotive OEM and provide them to include the following
users must be provided with transmitter/antenna installation requirements and
The antenna used with this device must be installed to provide a separation distance of at
transmit simultaneously with any other
transmitter product procedures.
The Maximum ERP/EIRP and maximum antenna gain required for compliance with Parts
ing the other party’s responsibility to obtain station licensing.