2.6. Mounting the tray
-
Centre on tab and lower into place (fig. 4).
2.7. Door closing pressure
Figure 5
The closing latch rotates around a pressure screw
positioned cam.
-
Loosen pressure screw 1.
-
Turn cam 2 to desired position.
-
Tighten pressure screw 1.
2.8. Pre-utilisation check
-
Check that the glasses are not damaged.
-
Check that the smoke passages are not obstructed by
packaging or removable parts.
-
Check that the seals of the smoke-line are in good
condition.
-
Check that the doors close correctly.
-
Check that all removable parts are correctly installed.
(grates, tray, etc.)
2.9. Soot Doors
It will be necessary to have a soot door to enable the
chimney to be swept. This may either be in the actual
brickwork of the chimney or in the register plate. Various
type and positions of soot doors are shown in figure 3.
2.10. Commissioning
On completion of the installation and after allowing a
suitable period of time for the fire cement and mortar to
dry out, the stove should be lit and checked to ensure
that smoke and fumes are taken from the appliance up
the chimney and emitted safely. Also check all joints
and seals.
Installation instructions
Figure 4 - Fixing the ash lip tray
1 - Pressure screw
2 - Cam
Figure 5 - Door closing pressure
Continental "La Parisienne" - ref. : 124 03 01 - 124 05 01 - 124 07 01
6
Technical manual "286"
