Continental Motors O-200-D, Инструкция по установке и эксплуатации, Страница: 24 / 112

2-2 O-200-D & X Series Engine Installation and Operation Manual
3 January 2017
Engine Description
2-1.1. Engine Model Number Definition
The description of each alphanumeric character in the engine model number is given
below for the example engine model number O-200-D1B (Figure 2-2).
Figure 2-2. Engine Model Definition
2-1.2. Cylinder Number Designations
Refer to Figure 2-3:
•
The front of the engine is the end closest to the propeller and the rear of the engine is
the accessory end.
•
Viewed from the rear of the engine, the left-side cylinders are designated by even num-
bers 2-4, with Cylinder 2 being closest to the rear.
•
The right side cylinders have odd number sequential designation 1-3, with Cylinder 1
being closest to the rear.
•
Firing order of the engine is 1-3-2-4.
Figure 2-3. Cylinder Number Designation
O - 200 - D 1
Specification Number
Model Identifier
Cubic Inch Displacement (nominal)
Horizontally Opposed Cylinders
B
Shipping Designation
O - 200 - D 1
Specification Number
Model Identifier
Cubic Inch Displacement (nominal)
Horizontally Opposed Cylinders
B
Shipping Designation