W415-1730 / B / 07.28.17
EN
18
finishing
FIG. 3
The glass front must be removed and the appliance must be secured in its final location before the crystal embers
are installed.
A.
Carefully place crystal embers into the bottom media tray on the front of
the appliance as illustrated. Apply an even layer from side to side.
A.
Remove the 2 screws from the top of the appliance, as shown below.
B.
Have two people lift the glass up and away from the appliance, holding the glass vertical not flat while
carrying. Place the glass face down onto a soft, non-abrasive surface, careful not to flex the glass.
C.
Install the crystal embers, refer to "crystal ember installation" section. Install the front glass by aligning
with the pins on the appliance. This ensures the touch display panel performs properly.
FOR WALL MOUNT, PARTIAL RECESS AND MANTEL INSTALLED APPLIANCE ONLY:
3.2 front glass removal
3.3 crystal ember installation
Содержание CEFL100FH
Страница 22: ...W415 1730 B 07 28 17 EN 22 wiring diagram CEFL72FH CEFL60FH CEFL100FH...
Страница 28: ......
Страница 50: ...W415 1730 B 07 28 17 50 FR sch ma de cablage CEFL72FH CEFL60FH CEFL100FH...
Страница 56: ...W415 1730 B 07 28 17 56 FR guide de d pannage...