DOWN
Press the key once, LED Display in regular flash showing current set
temperature. Continue pressing to adjust set temperature, one press
reduce 1
℃
. Regular flash quit after 5 seconds detecting no press and
new set temperature save. LED display return to show actual
temperature inside.
Child Lock
（
Combination key
）
1. Lock
：
Press both keys at the same time for 3 seconds to
lock.
2. Unlock
：
Press both keys at the same time for 3 seconds to
unlock.
Fahrenheit/Celsius display interchange
Switch temperature display between Fahrenheit and Celsius
by pressing and holding the key for 3 seconds.
Attention
1. The ex-factory temperature of this product is 12
℃
, and the
corresponding temperature range need to be set according
to the actual wine.
2. For both upper and lower zone, the cooling temperature
could be set from 5
℃
- 22
℃
. But lower zone temperature will
equal to or be higher than upper zone.
3. Alarm sound: when the system malfunction occur and
alarm sound, press any key on the control panel to cancel
the alarm sound.
4. Error code:
When the temperature sensor of upper zone failure occur,
error code displays: E1 for open circuit; E2 for short circuit.
When the temperature sensor of lower zone failure occur,
error code displays: E5 for open circuit; E6 for short circuit.
EN-26
The recommended temperature setting is 12 ° C
