45
Save the channel
Specify a radio station to save.
Press on the button
PROG
.
P
until it appears on the screen and the number of the
memory location where the station is to be saved flashes.
Press
or
, to select the programming location for this station.
Press
PROG
to save the channel.
Automatic channel saving
Press and hold the button
in the
CD/USB
area or
until the channel
search starts automatically. All the channels found are then automatically saved in
succession. Press the button again to deactivate the automatic recording.
Display of programmed channels
Press the
PRE
button of the remote control or the
PRESET
button of the
HIFI speaker to display the channels saved one after the other.
Alternating mono / stereo modes
The
MONO/ST.
button allows you to switch between mono and stereo modes for
a station. When a stereo signal is present, the indication ST appears on the screen.
CD and USB media playback
Pay attention to the following points:
Due to the many file systems and formats, the operation of connected media cannot
be guaranteed.
Depending on the size of the data medium, the system may take more or less time
to recognize it.
Supported file systems are FAT16 and FAT32; the supported file format is MP3.
Depending on the media inserted, several functions may not be supported: Thus, for
audio CDs, it is impossible to select a folder or display the titles.
External hard drives are not supported.
Inserting a CD
Make sure to leave at least 15 cm free above the unit so that the CD compartment
cover can open without hindrance.
Press on the
OPEN
button of the CD compartment to open.
OP
is display on the
screen.
Place a CD with the printed side up on the support, ensuring that it is correctly
positioned.
Close the CD compartment by pressing on the cover until it clicks into place. ---
appears on the screen during playback. The first title will then start playing
automatically.
If there is no disc or the disc is not playable,
NO
will appear on the screen.
Inserting a USB HIFI speaker