Conti TWIN STAR 2, Техническая документация инструкция

Страница: 15 / 46

7.4.3 Cleaning function :
A cleaning cycle can be carried out independently on each group and at any time, otherwise
and after 500 coffee are produced on a group, the corresponding display will show:
Please Rinse
Insert a blind filter with a cleaning tablet into one of the filter holders and install it on the group
where the message is shown.
To start the cleaning cycle and suppress the message, press during 2 sec the 5th push-button
(CONT/CAPPU).
The pump and the group solenoid valve are 2 sec ON, 1 sec OFF, repetition 15 times.
During the cleaning cycle the display will indicate:
Washing
in Progress
When the 15 times rinsing cycle are finished, the display will indicate:
Rinse
Remove the filter holders, and press the 5th push-button (CONT/CAPPU)
The rinsing cycle start. The pump and the group solenoid valve are 2 sec ON, 1 sec OFF,
repetition 15 times. During the Rinsing cycle the display will indicate:
Rinsing
in Progress
When the rinse cycle is finished, the display will return to the standard mode and the coffee
counter of the group will go back to zero.
Remarks:
- The group continues functioning during the rinse cycle.
- Re. The coffee counter: each push-button is worth 1 unit, the CAPPU button has no value.
- The cleaning cycle can be activated before a message appears on the display.
- While a group is being cleaned, the others groups will work normally.
- All groups can be cleaned at the same time.
- The cycle can be stopped by pressing one of the five push-buttons of the group.
13