HELIPTIC-9x10WH
- 3x3 White beams animation projector with non-stop PAN rotation
Page 6
English
MENU
UP and DOWN
Action
ENTER
Activates the PAN movement reversion when the Slave and Show modes are activated,
or in DMX mode.
Press ENTER and select Normal or Reverse with UP and DOWN.
Saves
changes
Activates the bar 1 TILT movement reversion when the Slave mode is activated, or in
DMX mode.
Press ENTER and select Normal or Inverse with UP and DOWN.
Saves
changes
Activates the bar 2 TILT movement reversion when the Slave mode is activated, or in
DMX mode.
Press ENTER and select Normal or Inverse with UP and DOWN.
Saves
changes
Activates the bar 3 TILT movement reversion when the Slave mode is activated, or in
DMX mode.
Press ENTER and select Normal or Inverse with UP and DOWN.
Saves
changes
Reverses the sequence movements. When No is selected, the sequences are executed
from right to left, when Yes is selected, they are executed from left to right.
Press ENTER and select Yes or No with UP and DOWN.
Saves
changes
Tests each function.
Launches
the test
Displays the total operating hours since the product was switched on for the first time.
No action
Displays the current software versions.
No action
Resets the device
Resets
PAN movement initial position settings.
TILT 1 movement initial position settings.
TILT 2 movement initial position settings.
TILT 3 movement initial position settings.
4.2 - Initial position settings
After initialising, the moving head is automatically positioned on its original positions.
You can configure this positions as it pleases you.
Enter the DMX Address menu, then press ENTER for more than 3 seconds. You are now accessing the initial position settings.
