Evora-Flex5R
- SPOT/FROST moving head with Philips
©
MSD PLATINUM 5R lamp
Page 8
English
This menu allows you to visualise the moving head running time, its temperature, and the current version of the internal
software.
This menu allows you to configure the lamp ignition, power off and responses depending on the internal temperature.
Note: In order to reposition the potentially disturbed sensors, the projector will automatically resets once the lamp
is turned on.
7.2 INFORMATION
7.3 LAMP CONTROL
Submenus
Values
Description
Time Information
Current Time
Current running time since the unit was last switched on.
Total Run Time
Overall running time since the very first time the device
was switched on.
Last Run Time
Running time since the last running time reset.
Lamp Hours
Displays the running time of the lamp.
Lamp Off Time
Displays the running time of the lamp the last time it was
on.
Last Run Password
Password allowing you to reset the Last Run Time.
The password is: 038
Clean Last Run
Allows you to reset the Last Run Time.
Lamp Time Password
Password allowing you to reset the overall lamp running
time (Lamp Hours).
The password is: 038
Clear Lamp Time
Allows you to reset the lamp overall running time. Please
only use this function each time you replace the lamp.
Temperature Info
Head Temperature
Temperature of the projector head (°C).
Software Version
V1.1 .....
Current version of the internal software.
Submenus
Values
Description
Lamp On/Off
ON/
OFF
Turns the lamp on or off.
Automatic On
ON/
OFF
The lamp automatically turns on when the projector is on.
Lamp On Via DMX
ON
/OFF
Allow you to switch the lamp on via a DMX controller.
Values: 40 to 59 of channels 23, 21 or 34 depending on the mode used.
Lamp Off Via DMX
ON
/OFF
Allow you to switch the lamp on via a DMX controller.
Values: 60 to 79 of channels 23, 21 or 34 depending on the mode used.
Max On at Temp.
20~79° ou
45°
68~174°F ou
113°
Sets the inside temperature from which the lamp will restrike after
automatic shut off.
Lamp Off Temp.
80~139° ou
130°
176~282°F ou
266°
Sets the inside temperature at which point the lamp will shut off.
