English
DART90iZoom
- 90W 4-in-1 beam moving head with infinity move and Zoom
Page 31
Once switched on the unit will launch an initialisation. The display will indicate «Error channel is XX» if a problem occurs with
one or several channels.
The unit will then reset all its motors to their initial positions. The message may keeps appearing after 3 resets, meaning there
are more than 3 errors. Channels cannot operate properly in the event of 3 errors or more, if they are less than 3 errors the
defective channels will be disabled.
Error channel is 05: PAN movement error (yoke).
This message will appear upon initialisation if the PAN position magnetic sensor of your device is defective.
Error channel is 06: TILT movement error (head).
This message will appear upon initialisation if the TIL position magnetic sensor of your device is defective.
Errors may have various origins. Sensors are used to set the motors in their default position.
Either the magnetic sensors are defective, or the magnets have been displaced.
Problems might also come from a defective motor or the motor electronic management.
In any case, please write down the error displayed and contact your retailer to launch a maintenance procedure.
8 - Error messages
9 - Dimensions
334
202
235
155
180
213
236
186
187
75
125
176
