G
Stand in front of the cot or travel cot opposite
the hanger and pull up the green loop at the
centre of The Cot Canopy (G1) and hook the
green loop over the hook at the end of the
hanger. You should have to use a little effort
to do this and you may need to pull the
hanger towards you.
H
If the corners of The Cot Canopy have been
pulled up with the action of attaching the
loop to the hook, pull the corners of The Cot
Canopy back onto the corners and adjust
the sizing zips to best fit the size of the cot or
travel cot which you are using, ensuring that
excess fabric is secured behind the zips. The
wider the cot or travel cot, the more likely it
will be that the sizing zips need to be opened.
Pull the fabric tight from top corner to foot on
each corner and tuck any excess fabric under
each foot – this helps to keep the top corners
in place.
Adjust the 3 lower over panels and 4 mesh
and outer layer upper doors as required
for the child and to provide the desired
level of darkness. Take care to assess the
temperature of the room, it is recommended
that at least 1 outer opening is kept open,
with just the mesh closed, for optimal viewing
and air circulation. The mesh alone provides
a good level of darkness.
NOTE: The top 4 access openings can be
open, both layers fully closed or vented. The
lower side panels can be vented, covered with
the outer panels or partially covered using the
poppers to secure up the outer panels. The
back panel under the clamp is darkened mesh
only and does not have an outer panel, to
ensure consistent and comfortable ventilation.
G
H
(G1)
