Contemporary Research
17
2
32-MTA Mono TV Tuner
ns
Safety Instructio
Read before operating equipment.
cleaners. Use a damp cloth for cleaning.
2.
Power Sources -
Use supplied or equivalent UL/CSA approv
3.
Outdoor Antenna Grounding -
sure the antenna or cable system is grounded so as
and built-up static charges. Section 810 of the Nati
information with respect to proper grounding of th
lead-in wire to an antenna discharge unit, size of
unit, connection to grounding electrodes, and
4.
Lightning
- Avoid installation or reconfiguration of wiring during lightning activity.
5.
Power Lines -
overhead power lines or other electric light
or power circuits or where it can fall into such power lines or circuits. When installing an outside antenna
h power lines or circuits, as contact with them might be fatal.
6
or
7
t through openings as they
ectric shock. Never spill
liquid of any kind on the product.
8.
his product yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified
e
•
y
•
r the cabinet is damaged.
•
When the video product exhibits a distinct change in performance, this indicates a need for service.
*
Note to CATV system installer
: This reminder is provided to call CATV system installer's attention to
Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I), that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building as close to the point of cable entry as possible.
1.
Cleaning -
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
ed low voltage DC plug-in transformer.
If you connect an outside antenna or cable system to the product, be
to provide some protection against voltage surges
onal Electrical Code, ANSI/NFPA No. 70, provides
e mast and supporting structure, grounding of the
grounding conductors, location of antenna discharge
requirements for the grounding electrode.
Do not locate an outside antenna system near
system, refrain from touching suc
.
Overloading -
Do not overload wall outlets and extension cords as this can result in a risk of fire
electric shock.
.
Object and Liquid Entry -
Never push objects of any kind into this produc
may touch dangerous voltage points or short out parts, resulting in a fire or el
Servicing -
Do not attempt to service t
9.
Damage Requiring Service -
s rvice personnel under the following conditions:
•
When the power supply cord or plug is damaged.
•
If liquid spills or objects fall into the product.
If the product is exposed to rain or water.
•
If the product does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions. An improper adjustment of other controls ma
result in damage and will often require extensive work by a qualified technician to restore the product
to its normal operation.
If the video product is dropped o
