Contemporary Research
8
232-ATSC+1 HDTV Tuner
Menus
IP Configuration
Typical operation:
Press Setup to edit value, characters will flash
Use direction keys to change
Press Setup to save
IP Port
23
IP port for Telnet communication – Click or hold Up or Down to set.
Gateway
255.255.255.000
Quad address – Left/Right steps through each group, click Up or Down to step
one at a time, hold down to move faster.
Subnet Mask
255.255.255.0
Subnet has a limited range of combinations, so this function is simplified
Left/Right steps through each group, click Up or Down for options
IP Address
192.168.1.231
Left/Right steps through each group, click Up or Down to step one at a time, hold
down to move faster.
IP Mode
Selects Static (default) or DHCP IP modes
DHCP will select new address
IP Address will show change when you select DHCP
If you go back to Static, the address you defined in that mode will be set
MAC/SN
Shows network MAC address
Ex: 00:14:C8:02:13:BF
First 3 bytes is the CR MAC address, 02 designates 232-ATSC+1, and the last two
are the serial #.
Front-Panel Button Sequences
Pressing
Up
and
Down
keys toggles air/cable tuning
Pressing
Left
and
Right
keys toggles mute on/off
While on
Setup
:
Firmware
, and when a USB cable is connected to a PC, clicking
Setup
and
Power
will start a firmware upload process, and a file window will open up on the PC desktop.
After the firmware installs, pressing the
Left
key will exit the firmware mode
If the
Setup
key is locked out, pressing
Setup
and the
Right
key will unlock setup until the tuner
resets, and turn the tuner on if it is off (even if the Power button is locked)
Press
Power
and
Up
together when at
Setup:Firmware
menu to reset to default settings
