Contemporary Controls EISK5-100T/F Series Скачать руководство пользователя страница 4

NEED MORE HELP INSTALLING THIS PRODUCT? 

For  more  information,  visit  www.ccontrols.com.    If  contacting  our  office,  ask  for 
Technical Support. 

WARRANTY 

Contemporary  Controls  (CC)  warrants  this  product  to  the  original  purchaser  for  five 
years  from the shipping  date.   If  it  fails to  operate  in compliance  with  its specification 
during this period, CC will, at its option, repair or replace the product at no charge.  The 
customer is responsible for shipping the product; CC assumes no responsibility for the 
product until received.  This limited warranty covers products only as delivered.  If user 
modification  damages  the  product,  repair  or  replacement  are  not  covered.    Damage 
from abuse, accident, disaster, misuse, or incorrect installation are not covered.  This 
warranty in no way warrants suitability of the product for any specific application.  More 
warranty information can be found at www.ccontrols.com.

 

Warning:  This is a Class A product. In a domestic environment this product may cause radio 
interference in which case the user may be required to take adequate measures. 

RETURNING PRODUCTS FOR REPAIR 

Return the product to the location where it was purchased by following the instructions 
at the URL below: 

www.ccontrols.com/rma.htm 

Declaration of Conformity 

Applied Council Directives: 

Low Voltage Directive 2006/95/EC 

General Product Safety Directive 2001/95/EC 

Electromagnetic Compatibility Directive 2004/108/EC 

Restriction of Hazardous Substances Directive 2002/95/EC 

Waste Electrical and Electronic Equipment Directive 2002/96/EC 

Standards to which Conformity is Declared:

 

EN 55022:2006 + A1:2007, Class A 

— Emissions 

EN 55024:1998+ A1:2001 + A2:2003 

— Immunity 

Type of Equipment:

   Industrial Ethernet switching hubs 

Models:

  EISK5-100T/FC 

4-port 10/100, 1-port multimode fibre (SC connectors) 

 

EISK5-100T/FCS  4-port 10/100, 1-port single-mode fibre (SC connectors) 

 

EISK5-100T/FT 

4-port 10/100, 1-port multimode fibre (ST connectors) 

Manufacturer’s Declaration 

The listed models conform to the above directives and standards.  

June 2010 

TD050500-0ID

 

Содержание EISK5-100T/F Series

Страница 1: ...per port uses the Auto MDIX function for attaching local devices and has one LED for link activity rate and one LED for duplex status The unit provides preamble regeneration and retimes signals to eliminate jitter Digital pre emphasis compensates for inherent signal strength roll off Link indicates that a working adapter or hub is on the distant end of a segment Port assignments are learned by rea...

Страница 2: ... lb 0 45 kg Regulatory Compliance CE Mark EN55022 EN55024 CFR 47 Part 15 Class A UL508 Industrial Control Equipment For use in Class 2 circuits Functional Compliance ANSI IEEE 802 3 Copper Fibre Data Rates 10 100 Mbps 100 Mbps Signalling 10BASE T 100BASE FX 100BASE TX Connectors RJ 45 shielded SC or ST Segment 100 m 2 km Length max 15 km LED Indicators Power green Port Activity flashing Port Rate ...

Страница 3: ... labelled L glows solid if a link exists flashes to show activity and shows data rate by colour green for 100 Mbps and yellow for 10 Mbps The LED labelled D glows solid green if full duplex is on or is unlit when the port is in half duplex mode but in half duplex operation it will flash if a collision occurs The LEDs of Ports 2 4 are unlabelled but work the same The fibre port 5 LED glows solid gr...

Страница 4: ...ass A product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures RETURNING PRODUCTS FOR REPAIR Return the product to the location where it was purchased by following the instructions at the URL below www ccontrols com rma htm Declaration of Conformity Applied Council Directives Low Voltage Directive 2006 95 EC Genera...

Отзывы: