background image

7. BIOS Setup 

 

 

 

64

 

SPI-8550-LLVAS 

Boot Menu 

After you turn on, it will attempt to load the operating system from the drive of your choice. If it cannot 
find the operating system on that drive, it will attempt to load it from one or more other drives in the 
order specified in the Boot Menu. 

Note:

 Specifying any drive as a boot drive on the Boot Menu requires the installation of an 

operating system on that drive. Many PCs come with an operating system already installed 

on the hard drive (C:), which is often used for booting the operating system. To use another 

drive as a bootable drive may require your installing the operating system on it. 

Selecting "Boot" from the Menu Bar displays the Boot menu, which looks like this: 

 

Main      Advanced      Security      Power      PC_Health      Boot      Exit 

 

 

 

+Removable Devices 

 

 

+Hard Drive 

 

 

CD-ROM  

 

Network Boot 

 

 

 

 

 

Figure 7.19.  Boot Window 

 

You can arrange the boot order list at the top of this menu to specify the order of the devices from which 
the BIOS will attempt to boot the Operating System. To move a device, first select it with the 
up-or-down arrows, and move it up or down using the <+> and <-> keys. 

Note:

 If you have more than one hard drive, or more than one removable drive, use the sub 

menus to specify which one to use on the boot order list, as described in the following pages. 

Содержание SPI-8550-LLVAS















































































Отзывы: