—
Product Nomenclature and Function
—
SH-9008AT-POE Reference Manual
- 19 -
2.
Power Supply Connector
Use the 6-pin connector to connect to external power.
Pin Assignment
Pin number
Signal name
Description
1
V1+
PWR-1 power supply (12 - 57VDC±5%)
2
V1-
PWR-1 power supply (GND)
3
FCOM
Power failure detection relay terminal (common)
4
FNC
Power failure detection relay terminal (normally closed)
5
V2
PWR-2 power supply (12 - 57VDC±5%)
6
V2-
PWR-2 power supply (GND)
This hub can be operated by supplying the power to either PWR-1 or PWR-2.
Moreover, the operation can be continued even when PWR-1 or PWR-2 is turned off while the power
is simultaneously supplied to them.
Setting Ferrite Core
To suppress noise emission from the product, set a ferrite core on the cable (1 turn) about two
centimeters away from the power connector.
Recommended ferrite core: E04SR401938 (SEIWA)
Содержание SH-9008AT-POE
Страница 3: ... 3 Table of Contents Customer Support and Inquiry 35 1 Services 36 ...
Страница 24: ... 24 Setting Up This section describes how to set up the product ...
Страница 33: ... Appendix SH 9008AT POE Reference Manual 33 2 Physical Dimensions When the product is mounted on DIN rail ...
Страница 34: ... Appendix SH 9008AT POE Reference Manual 34 When the product is set on the wall ...
