manualshive.com logo in svg

Contec PIO-32/32B(PCI)V, Руководство пользователя, Страница: 8 / 59

Поделиться
Скачать
Contec PIO-32/32B(PCI)V Скачать руководство пользователя страница 8

 

 

1. Before Using the Product  

 

 

 

PIO-32/32B(PCI)V 

1

 

1.

 

Before Using the Product 

This chapter provides information you should know before using the product. 

About the Board 

This board is a PCI bus-compliant interface board for input/output of digital signals. 
It can be inputted by switch and relay. 

PIO-32/32B(PCI)V can input and output up to 32 channels. 

And this board is the equivalent of PIO-32/32B(PCI)H.  For the detail, please refer to the chapter 6 
Differences between PIO32/32B(PCI)H and PIO32/32B(PCI)V. 

Using the bundled driver library package [API-PAC(W32)], you can create Windows application 

software for this board in your favorite programming language supporting Win32 API functions, such 
as Visual Basic or Visual C/C++. 

Features 

-  Opto-coupler isolated input (compatible with current sink output) and opto-coupler isolated open-

collector output (current sink type) 

This product has the opto-coupler isolated input 32channels (compatible with current sink output) 

whose response speed is 200µsec and opto-coupler isolated open-collector output 32channels (current 

sink type).  Common terminal provided per 16channels, capable of supporting a different external 

power supply.  Supporting driver voltages of 12 - 24 VDC for I/O. 

-  Opto-coupler bus isolation 

As the PC is isolated from the input and output interfaces by opto-couplers, this product has excellent 
noise performance. 

-  Power for opto-coupler operation (12VDC 240mA) supplied internally 

As the power to run the opto-couplers is supplied internally, no external power supply is required.  The 

use of jumpers allows you to decide whether you want to use the internal or external power supply for 
every 16 points. 

-  You can use all of the input signals as interrupt request signals.  

You can use all of the input signals as interrupt request signals and also disable or enable the interrupt 

in bit units and select the edge of the input signals, at which to generate an interrupt. 

-  Windows/Linux compatible driver libraries are attached. 

Using the attached driver library API-PAC(W32) makes it possible to create applications of 

Windows/Linux.  In addition, a diagnostic program by which the operations of hardware can be 

checked is provided. 

Содержание PIO-32/32B(PCI)V




























































Отзывы:

Нет отзывов