Contec PIO-16/16L(CB)H, Руководство пользователя

Страница: 25 / 57

2. Setup
18
PIO-16/16L(CB)H
Step 3 Installing the Hardware
For using an expansion PC card under Windows, you have to let the OS detect the I/O addresses and IRQ
to be used by the PC card. The process is referred to as installing the hardware.
When using more than one PC card, install the PC cards one at a time and do not install the next PC card
until setup is complete for the previous PC card.
Turning on the PC
Turn on the power to your PC.
CAUTION
- The PC card cannot be properly installed unless the resources (I/O addresses and interrupt level) for
the PC card can be allocated. Before attempting to install the PC card, first determine what PC
resources are free to use.
- The resources used by each PC card do not depend on the location of the PC cards slot or the PC card
itself. If you remove two or more PC cards that have already been installed and then remount one of
them on the computer, it is unknown that which one of the sets of resources previously assigned to
the two PC cards are assigned to the remounted PC card. In this case, you must check the resource
settings.
Setting with the Found New Hardware Wizard
(1) The "Found New Hardware Wizard" appears.
Select "Install from a list or specific location [Advanced]" and click the "Next" button.